ACS Valves Vertical CNC Machining Center

Rotor tips wear down over time, causing issues with material flow. Our video illustrates why rotor maintenance is so critical to the overall efficiency of your rotary airlock valve.

Learn about the features of our Multi-Port rotary airlock valve as it conveys high volumes of material in different conveying scenarios: one line, split feeds, and varying types of equipment.

Cleaning a Quick-Clean rotary valve is simple! This animation offers a step by step instruction on how to do it.

Watch a quick 3D demonstration of material flow and pocket fill in an MD series rotary airlock valve. The video is silent.

It's easy to order a new valve from ACS and have it get to you. Here's how the process works from start to finish.

Need a guide to removing the drive side endplate on your ACST-4 seals? Watch a quick visual breakdown of the process. The video is silent.

Our valves will fit literally anywhere. Watch the video to find your industry.

Keep valves compliant by ensuring rotor-to-housing clearance stays below 0.0079.

Every material is different, so every valve has to be designed to handle each combustible dust in order to prevent deflagration.

We talk a lot about how easy it is to clean our valves. Watch as we put our dinner into one of our valves and then clean it up!

We're facing our critics head on.

Learn the fundamentals of airlock performance, how to minimize air leakage and how improve efficiency.

When conveying sticky material, you can get the benefits of a blow-through without the premature wear.

Reduce agglomerated lumps without degrading the material or creating excessive dust.

Choosing the right rotary valve can improve your productivity. Choosing the wrong one can do the opposite.

Cleaning is the worst! Make it better. Watch this video to learn how.

We did! Get an up-close and personal look at one of our newest Quick-Clean models.

A feeder valve for sticky and abrasive materials combines pressurized air with the dry bulk material.

Enables quick, tool-less access to the rotor and the interior of the housing for cleaning.

Our test center is designed to test your materials to determine which airlock valve/feeder is best suited for your application.

ACS Valves Quick Clean Feeder on Rails is designed for quick take apart applications.

This valve can be taken apart, cleaned and reassembled in just minutes hassle free!

The Quick Clean feeder is easy to disassemble and reassemble, in as little as 2 minutes.

This simple rotary valve re-assembly sequence shows the significant labor and downtime savings associated with this rotary valve design

Each rotary valve goes through a thorough inspection process before leaving ACS.

ACS Valves production operations include casting of rotary valve housings and the CNC machining of the housings.

ACST-4 Glandless Teflon Shaft Seal can be easily removed and reassembled in just a few minutes using basic hand tools.

Eliminates the need for conventional packing gland-style shaft seals.