905 765 2004

Filter by topic

Articles for Durability

Mar 15, 2024 by Paul Bowman

Please don’t do these 5 things to your rotary valve
3 minute read
Seriously, just don’t do them. We’ll explain why you should avoid these 5 practices to keep your valve’s performance strong, ensure it always runs safely, and maximize its lifespan.
Jan 16, 2023 by Terri Shipstone

How do I configure a valve for conveying cement?
3 minute read
In a heavy-duty setting, durability and reliability are key. These coatings and options help rotary valves handle cement and construction materials
Aug 17, 2020 by Megan Thompson

I’m ordering a new rotary valve. Do I need an air purge kit?
3 minute read
Air purge kits supply compressed air to the rotary valve to prevent wear and extend longevity
Jun 18, 2020 by Terri Shipstone

Stand up to corrosion with the XTR Series valve
3 minute read
The XTR Series rotary airlock valve comes fully armored with a corrosion-resistant, food-grade coating
May 20, 2020 by Megan Thompson

Why we recommend ACST-4 shaft seals for valves
3 minute read
Shaft seals are some of the fastest rotary valve parts to wear out. We’ll tell you which seal type has the most longevity and why
Apr 03, 2020 by Nena Dallas

Layer up: An overview of coating types for rotary valves
4 minute read
The coating on your rotary airlock valve affects factors like material capacity, lifespan and overall performance
Nov 22, 2019 by ACS Valves

Seriously, don’t buy a cheap valve
4 minute read
Quality machining, customization and aftermarket support add value to your rotary valve purchase
Oct 22, 2018 by Paul Bowman

Signs your valve is haunted (or needs repairs)
3 minute read
Is your rotary valve sending you these spooky warning signs? It may be time to repair or replace it
Oct 22, 2018 by Megan Thompson

Check out these 4 valve maintenance tips we published
less than a minute read
We covered four critical rotary valve maintenance tips in an article for Processing Magazine
Jan 23, 2018 by ACS Valves

Can your rotary valve fit in your bread box?
1 minute read
What does it mean to have one valve to rule them all? It means you can fit our valves into pretty much any space. Such as: a canoe, a fishing tackle box, and a cooler for your carefully selected beer.
Nov 24, 2017 by Nena Dallas

What coatings mean for your valves
3 minute read
When your valve needs to weather a material storm, layering it up with a coating can help it keep moving. Here's how.
Apr 25, 2017 by Nena Dallas

How to increase the life expectancy of your machinery
3 minute read
That rickety old valve has broken down again, and you're tired of replacing it all the time. Here are some tips on how to ensure your valves last longer and give you less downtime.
Mar 20, 2017 by Nena Dallas

An ACS crash course on seal types for rotary valves
3 minute read
When your shaft seal needs replacing, use this as your go-to guide on which one works best for your application.
Oct 25, 2016 by ACS Valves

How to prevent corrosion and cross-contamination in your rotary valves
3 minute read
Even the smallest bit of rust from corroded machinery can damage your end product. Here's how to keep your product looking great.

FAQs for Durability

Q.
Why use a shear pin sprocket with sawdust or wood fines?

A.
Sometimes the rotation of the rotor is reduced due to an overload of material, or larger pieces of material being fed through the valve, jamming in the clearances. In this case, shear pin sprockets will shear the pin on the sprocket, reducing the risk of damage to the rotor.
Q.
My valve is losing too much air, what could be the problem?

A.
Too much clearance between the rotor, endplates and or housing can result in air loss. Measure the rotor to endplate and rotor to housing clearances to confirm that they are an NFPA compliant 0.0079 inches. If the clearance is larger than this, it might be time to replace your rotor, rotary valve, or have it sent back to ACS for a repair or evaluation. Make sure to stick to a maintenance schedule and check your clearances at least every three months.

SEE ALL FAQS

PRODUCT HIGHLIGHT

Go ahead, make your valve

Put your own spin on our customizable valves to get the best valve for your application, material and industry.

Fail-safe food safety tips for rotary valves

The regulatory landscape is always changing, but there are surefire steps you can take to keep your valves and conveying systems free of contamination.