Those who work in manufacturing know the ins and outs can be pretty fascinating, whether it's the making of your favorite brand of cookies or complex automotive parts. It can also help you understand if the products you shop for are made with care and quality components.
It's just as important to know what goes into your rotary airlock valves, so we're explaining our manufacturing process from start to finish. There's a lot to cover. Part one starts with design, machining, and welding.
Check, check, check
You might notice there is a lot of checking and double-checking of components and documents throughout every step of the process. We'll talk about our final quality inspection in part two, but it's good to know that frequent checks and reviews are essential to ensure the sizes and tolerances of your rotary valve are as accurate as possible.
Step 1: Configuration and design
Before any work begins on the physical valve, we need to configure and design it to work effectively in your application. Configuration means selecting the right rotary valve model, size, rotor, coating, and any additional kits or accessories it may need.
Since valves are not one-size-fits-all, this step is critical to the rest of the process. Factors like your system type, conveying rate, and material characteristics all get plugged into a set of calculations. Then our sales team configures a valve that gives you the best material flow, longevity, reliability, and efficiency for your application.
As the sales rep walks you through the configuration process, they'll explain the best options and why they're being recommended to you. Once the order is confirmed, our engineering team reviews your order to ensure it conforms with design specifications.
Then a mechanical designer starts the detailed engineering required for your order. Your unique valve is rendered in AutoCAD and SolidWorks, taking into account all the important parameters like materials and tolerances. Once an engineering supervisor reviews the work order and designs, you receive a set of drawings for approval.
The drawings show the sizing, coatings, and options you chose. Once approved, they will be referenced throughout the rest of the manufacturing process to make sure everything matches.
Step 2: Machining to shape the parts
Based on your work order and drawings, our purchasing department sources high-quality materials from our approved suppliers. Then we can start machining the required castings and laser-cut steel components.
Machining basically means transforming the roughly-shaped metal into a finished part with precise tolerances. The machinist can perform the following operations to get the job done, though not every component will require the full set of operations.
- Turning creates cylindrical features such as shafts, bores, and outside diameters. A lathe rotates the workpiece while a cutting tool removes material.
- Milling can create different features such as flat surfaces, slots, and pockets. The workpiece can be stationary or moving while the rotating cutting tool removes material.
- Drilling and boring creates or refines holes in the workpiece to specific diameters and depths.
- Facing creates a flat surface with accurate dimensions by machining the end of a component.
- Tapping creates internal threads for the installation of fasteners.
Our machinists perform both CNC and manual machining. CNC machines are great for consistent, repeatable results, while manual machines give flexibility and control to experienced machinists.
Machinists need to make sure their instruments are properly maintained and calibrated, and if they notice any deviations from the work order, they'll report and correct the issue immediately.
Step 3: Welding with precision
Rotors are the most common component we weld here at ACS Valves, but we also weld accessories like shear protectors, blow-through adapters, and safety guards.
This step begins with what we call fit-up. We take individual laser-cut pieces of steel and position and align them to match the engineering drawings.
Next comes fixturing and tacking. Precision is critical throughout this step, so we might set up the components in jigs or fixtures to keep the alignment correct. We use small tack welds to temporarily hold the pieces together.
Then the welding starts. Welders use the required welds to permanently join the components. They're trained to safely operate all kinds of arc welding, flame-cutting, brazing, and soldering equipment to get the job done.
Once the welds and fabricated assemblies are ready, our team checks them for quality and alignment and ensures they conform to the required dimensions. We may do some additional grinding or finishing as needed.
Keep an eye out for Part 2
In part two of this series, we'll cover the final steps: rotary valve assembly, quality inspection, and shipping and support. Sign up for our newsletter to get a heads-up when the article is published.
If you're ready to get your own rotary valve order started, click here to find a rep near you.